Exclusive Discounts - Pay Online and Grab Up to 40% Discount on Certified Courses Across 15 Knowledge Areas HERE.
Exam Preparation
CQEمهندس جودة معتمد
التقييم:
الإنجليزي
متوسط
وجهاً لوجه
التدريب في الموقع
تدريب مباشر عن بعد
تدريب
التدريب
والإرشاد
السرعة الذاتية
تدريب
اختر تاريخ
لتحميل الكتيب
نبذة عن الدورة التدريبية
The Certified Quality Engineer is a professional who understands the principles of product and service quality evaluation and control. This body of knowledge and applied technologies include, but are not limited to, development and operation of quality control systems, application and analysis of testing and inspection procedures, the ability to use metrology and statistical methods to diagnose and correct improper quality control practices, an understanding of human factors and motivation, familiarity with quality cost concepts and techniques, and the knowledge and ability to develop and administer management information systems and to audit quality systems for deficiency identification and correction.
المخرجات الرئيسية
1
2
3
4
5
The American Society for Quality
The American Society for Quality (ASQ) is the world’s leading authority on quality. With more than 80,000 individual and organizational members, this professional association advances learning, quality improvement, and knowledge exchange to improve business results, and to create better workplaces and communities worldwide. Today, ASQ has become a global organization, with members in more than 140 countries. ASQ now has service centers in Mexico, China, and India, and has established strategic alliances with numerousorganizations to promote ASQ products and training. A rich history and bright future; we are ASQ, the Global Voice of Quality™. LEORON is an official educational partner for ASQ for number of EMEA countries.
محتوى الدورة التدريبية
Day 1
Management and Leadership
A. Quality Philosophies and Foundations
1. Evolution of Quality
2. Continuous improvement tools
B. The Quality Management System (QMS)
1. Strategic planning
2. Deployment techniques
3. Quality information system (QIS)
C. ASQ Code of Ethics for Professional Conduct
D. Leadership Principles and Techniques
E. Facilitation Principles and Techniques
1. Roles and responsibilities
2. Facilitation tools
F. Communication Skills
G. Customer Relations
H. Supplier Management
1. Techniques
2. Improvement
3. Risk
I. Barriers to Quality Improvement
1. Evolution of Quality
2. Continuous improvement tools
B. The Quality Management System (QMS)
1. Strategic planning
2. Deployment techniques
3. Quality information system (QIS)
C. ASQ Code of Ethics for Professional Conduct
D. Leadership Principles and Techniques
E. Facilitation Principles and Techniques
1. Roles and responsibilities
2. Facilitation tools
F. Communication Skills
G. Customer Relations
H. Supplier Management
1. Techniques
2. Improvement
3. Risk
I. Barriers to Quality Improvement
Day 2
The Quality System
A. Elements of the Quality System
1. Basic elements
2. Design
B. Documentation of the Quality System
1. Document components
2. Document control
C. Quality Standards and Other Guidelines
D. Quality Audits
1. Types of audits
2. Roles and responsibilities in audits
3. Audit planning and implementation
4. Audit reporting and follow-up
E. Cost of Quality (COQ)
F. Quality Training
1. Basic elements
2. Design
B. Documentation of the Quality System
1. Document components
2. Document control
C. Quality Standards and Other Guidelines
D. Quality Audits
1. Types of audits
2. Roles and responsibilities in audits
3. Audit planning and implementation
4. Audit reporting and follow-up
E. Cost of Quality (COQ)
F. Quality Training
Day 3
Product, Process, and Service Design
A. Classification of Quality Characteristics
B. Design Inputs and Review
1. Inputs
2. Review
C. Technical Drawings and Specifications
D. Verification and Validation
E. Reliability and Maintainability
1. Predictive and preventive maintenance tools
2. Reliability and maintainability indices
3. Reliability models
4. Reliability / Safety / Hazard Assessment Tools
B. Design Inputs and Review
1. Inputs
2. Review
C. Technical Drawings and Specifications
D. Verification and Validation
E. Reliability and Maintainability
1. Predictive and preventive maintenance tools
2. Reliability and maintainability indices
3. Reliability models
4. Reliability / Safety / Hazard Assessment Tools
Day 4
Product and Process Control
A. Methods
B. Material Control
1. Material identification, status, and traceability
2. Material segregation
3. Material classification
4. Material review board (MRB)
C. Acceptance Sampling
1. Sampling concepts
2. Sampling standards and plans
3. Sample integrity
D. Measurement and Test
1. Measurement tools
2. Destructive and nondestructive tests
E. Metrology
F. Measurement System Analysis (MSA)
B. Material Control
1. Material identification, status, and traceability
2. Material segregation
3. Material classification
4. Material review board (MRB)
C. Acceptance Sampling
1. Sampling concepts
2. Sampling standards and plans
3. Sample integrity
D. Measurement and Test
1. Measurement tools
2. Destructive and nondestructive tests
E. Metrology
F. Measurement System Analysis (MSA)
Day 5
Continuous Improvement
A. Quality Control Tools
B. Quality Management and Planning Tools
C. Continuous Improvement Methodologies
D. Lean tools
E. Corrective ActionF. Preventive Action
B. Quality Management and Planning Tools
C. Continuous Improvement Methodologies
D. Lean tools
E. Corrective ActionF. Preventive Action
Day 6
Quantitative Methods and Tools
A. Collecting and Summarizing Data
1. Types of data
2. Measurement scales
3. Data collection methods
4. Data accuracy and integrity
5. Descriptive statistics
6. Graphical methods for depicting relationships
7. Graphical methods for depicting distributions
B. Quantitative Concepts
1. Terminology
2. Drawing statistical conclusions
3. Probability terms and concepts
C. Probability Distributions
1. Continuous distributions
2. Discrete distributions
D. Statistical Decision-Making
1. Point estimates and confidence intervals
2. Hypothesis testing
3. Paired-comparison tests
4. Goodness-of-fit tests
5. Analysis of variance (ANOVA)
6. Contingency tables
E. Relationships Between Variables
1. Linear regression
2. Simple linear correlation
3. Time-series analysis
F. Statistical Process Control (SPC)
1. Objectives and benefits
2. Common and special causes
3. Selection of variable
4. Rational subgrouping
5. Control charts
6. Control chart analysis
7. Pre-control charts
8. Short-run SPC
G. Process and Performance Capability
1. Process capability studies
2. Process performance vs. specifications
3. Process capability indices
4. Process performance indices
H. Design and Analysis of Experiments
1. Terminology
2. Planning and organizing experiments
3. Design principles
4. One-factor experiments
5. Full-factorial experiments
6. Two-level fractional factorial experiments
1. Types of data
2. Measurement scales
3. Data collection methods
4. Data accuracy and integrity
5. Descriptive statistics
6. Graphical methods for depicting relationships
7. Graphical methods for depicting distributions
B. Quantitative Concepts
1. Terminology
2. Drawing statistical conclusions
3. Probability terms and concepts
C. Probability Distributions
1. Continuous distributions
2. Discrete distributions
D. Statistical Decision-Making
1. Point estimates and confidence intervals
2. Hypothesis testing
3. Paired-comparison tests
4. Goodness-of-fit tests
5. Analysis of variance (ANOVA)
6. Contingency tables
E. Relationships Between Variables
1. Linear regression
2. Simple linear correlation
3. Time-series analysis
F. Statistical Process Control (SPC)
1. Objectives and benefits
2. Common and special causes
3. Selection of variable
4. Rational subgrouping
5. Control charts
6. Control chart analysis
7. Pre-control charts
8. Short-run SPC
G. Process and Performance Capability
1. Process capability studies
2. Process performance vs. specifications
3. Process capability indices
4. Process performance indices
H. Design and Analysis of Experiments
1. Terminology
2. Planning and organizing experiments
3. Design principles
4. One-factor experiments
5. Full-factorial experiments
6. Two-level fractional factorial experiments
Day 7
Risk Management
A. Risk Oversight
1. Planning and oversight
2. Metrics
3. Mitigation planning
B. Risk Assessment
C. Risk Control
1. Identification and documentation
2. Auditing and Testing
1. Planning and oversight
2. Metrics
3. Mitigation planning
B. Risk Assessment
C. Risk Control
1. Identification and documentation
2. Auditing and Testing
على من يجب الحضور؟
This highly practical and interactive course has been specifically designed for
This material is designed to aid quality engineers or individuals looking to achieve their CQE certification. Attendees of this course should have some prior knowledge of statistics and quality engineering as this course is designed as a review of the subject areas needed for the CQE exam.
→ Quality Engineers
→ QA/QC Engineers
→ Process engineers
→ Manufacturing Engineers
→ Quality Managers
→ Quality Improvement Professionals
→ Quality Consultants
→ Quality Professionals preparing to take the ASQ CQE exam
الدورات ذات الصلة
التعليمات
AR What language will the course be taught in and what level of English do I need to take part in an LEORON training program?
AR Most of our public courses are delivered in English language. You need to be proficient in English to be able to fully participate in the workshop and network with other delegates. For in-house courses we have the capability to train in Arabic, Dutch, German and Portuguese.
AR Are LEORON Public courses certified by an official body/organization?
AR LEORON Institute partners with 20+ international bodies and associations.We also award continuing professional development credits (CPE/PDUs) for:1. NASBA (National Association of State Boards of Accountancy) 2. Project Management Institute PDUs 3. CISI credits 4. GARP credits 5. HRCI recertification credits 6. SHRM recertification credits
AR What is the deadline for registering to a public course?
AR The deadline to register for a public course is 14 days before the course starts. Kindly note that occasionally we do accept late registrations as well, but this needs to be confirmed with the project manager of the training program or with our registration desk that can be reached at +91 4 95 5711 or [email protected].
AR What does the course fee cover?
AR The course fee covers a premium training experience in a 5-star hotel, learning materials, lunches & refreshments, and for some courses, the certification fee and membership with the accrediting bodies.
AR Does LEORON give discounts?
AR Yes, we can provide discounts for group bookings. If you would like to discuss a discount on a corporate level, we will be happy to talk to you.
التعليقات
- عرض:AR IAMM Internal Audit Maturity ModelAR In recognition of their dedication and contribution supporting IKEA Saudi Arabia in arranging training programs during 2017 & 2018, looking forward for more development and exciting effort this year. On behalf of IKEA Saudi Arabia, THANK YOU!Dalal Kutbi
- عرض:AR Certified Professional in Quality and Patient SafetyAR Dating back to 2014, Mobily’s “LEORON” experience has grown from a single collaboration to a long-term partnership. We consider “LEORON” Institute as a strategic partner, whose contribution has been nothing but premium in equipping our staff with field-based knowledge and information. Past three years have resulted with an expanded collaboration with superior customer service and support. Best Regards,Turki S. Alsahaan
- عرض:AR Certified Professional in Quality and Patient SafetyAR Since the partnership was signed between BAE Systems Saudi Development & Training and LEORON in 2017, we have been working together to offer the Saudi market a complete portfolio of training solutions benefiting from the wide and extensive experience of both parties. Recognizing the great success of this partnership, we are looking for further collaborations in the future that will position both companies as one of the leading training providers in Saudi Arabia. We thank the LEORON team for their full cooperation and continuing support, and look forward to further success together in the years to come.Emad Alrajih
- عرض:AR Certified Professional in Quality and Patient SafetyAR We have been working with LEORON for the past two years and will be working with them again this upcoming year. The programs they delivered were fruitful and exciting and our organization has received positive feedback from the participants. What our organization aims to do is to provide at no cost training for all the private sector employees so that they may benefit from our offered programs in Innovation and Professional development. LEORON has helped us achieve this goal. We look forward to continuing this service and wish them the best of luck. Regards,Nasser M. Al-Subaie
